GEDS200CSSAG1BCA; contactor guide card

GEDS200CSSAG1BCA; contactor guide card

GE Battery Status Sensor Board DS200CSSAG1BCA contains two 40-pin connectors and is 4 inches high and 11 inches wide.It also contains a 4-pin connector and a 9-pin connector.When the GE Battery Status Sensor Board DS200CSSAG1BCA is installed in a drive, you are exposed to high energy currents contained in the drive when powered and you must follow guidelines to ensure that power is disconnected from the drive.When you reach inside a drive (such as a board enclosure), always assume that the power is on.DC power to the drive is provided by a fused device, and when you remove the fuse, the device is disabled and power to the drive is stopped.See the information that came with the device to remove the fuse or otherwise disable the device.Wait thirty seconds and then continue allowing all current to leave the drive.Some components store energy during normal operation, and the thirty-second delay allows the current to drain or dissipate.

Tags:

WhatsApp

Business License

Main products

Wechat