DS200AAHAH1ADC Hub LAN Driver Board EX2000

Description

Argument

Products Description

DS200AAHAH1ADC Hub LAN Driver Board EX2000

DS200AAHAH1ADC is an ARCNET connected PCB. It was originally produced and sold by GE as part of its Mark V LM series components for the Speedtronic series.

VMIVME-7807RC.刘燕华.20210323_175249 (4).jpg

DS200AAHAH1ADC is commonly referred to as an AAHA board. It typically serves as an interface unit between external modules of different I/O kernels or<R>control engines. It enables these interface units to access ARCNET. Usually, two AAHA boards are used together with the<R>core. The first AAHA board serves as the connection between the user interface and the<R>core. There is an APL connector on AAHA that can be connected to the UCPB sub board in the<R>kernel on the UCIA board. The second AAHA board is used as a method to connect the<R>kernel to COREBUS. It promotes active communication between the I/O kernel and the<R>control engine in the<R>kernel. The APL connection on this AAHA is connected to the PANA daughter board.

VMIVME-7807.蒋娜.202108270859506 (1).jpg

VMIVME-7807RC.刘燕华.20210323_175249 (3).jpg

DS200AAHAH1ADC is a very small sub board with three communication ports on top. The leftmost port is the infrequently used EBNC port. Next to EBNC are the ARCBNC-B and ARCBNC-A ports. These two ports are connected to ARCNET. At the bottom of the circuit board are three pin connectors. The first pin connector is a 2-pin 2PL socket. The center of the bottom edge is a 10 pin APL socket. Next to the APL is a 9-pin EPL jack, which is also not frequently used.

主营产品.jpg