Products Description
GE DS200ADGIH1AAA Mark V Speedtronic Auxiliary Interface Board
GE DS200ADGIH1AAA是GE Speedtronic Mark V透平控制系统配套辅助接口板,作为机架内信号转接桥梁,实现主控制器与各类I/O板、端子板、信号调理板之间的信号路由与交互。板卡采用工业元器件设计,适配电厂透平控制柜高温、强电磁干扰的现场工况。
GE DS200ADGIH1AAA is an auxiliary interface board for GE Speedtronic Mark V turbine control system. It acts as an internal signal bridge, routing signals between the main processor, I/O boards, terminal boards and signal conditioning modules. Constructed with rugged industrial components, it can withstand high temperature and heavy electromagnetic interference inside power plant turbine cabinets.

板载多组连接器、测试点位与跳线配置,方便现场信号调试与通道定义。该型号已经停产,广泛用于燃气轮机、蒸汽轮机、联合循环发电机组存量控制系统大修、故障备件更换,是Mark V系统里关键的配套转接备件。
It is equipped with multiple connectors, test points and jumpers for convenient on-site signal commissioning and channel configuration. This model is end-of-life. It is widely sourced for overhaul and fault replacement of legacy gas turbine, steam turbine and combined cycle control racks.

Main Specifications 技术参数
1. Product Series / 产品系列:GE Speedtronic Mark V Turbine Control
2. Part Numbers / 型号编码:DS200ADGIH1AAA
3. Function Type / 类型:透平系统辅助信号接口转接板
4. Key Features / 特性:Internal signal routing, jumper configurable, EMI resistant, test points
5. Mounting / 安装:Mark V机架插槽安装,和同系列DS200板卡混装
Core Functions 核心功能
1. 机架内部信号分配与转接,连通主控单元和各I/O功能板卡。
Internal signal distribution and routing to connect main controller and I/O modules.2. 跳线自定义通道配置,适配不同机组的信号定义需求。
Jumper-based channel configuration to match signal definitions of different turbine units.3. 预留测试点位,方便维修人员在线检测信号状态,故障排查。
Built-in test points for online signal inspection and troubleshooting during maintenance.4. 信号隔离与缓冲,减少板卡之间的串扰,稳定控制回路。
Signal buffering and isolation to reduce cross-talk and stabilize control loops.5. 和Mark V整套控制架构兼容,配合保护、调速、温度采集板协同工作。
Fully compatible with Mark V ecosystem, cooperating with protection, speed and temperature boards.
Application Scenarios 应用场景
1. 电厂Mark V燃气轮机控制柜DS200ADGIH1AAA板卡损坏同型号替换。
Drop-in replacement for failed DS200ADGIH1AAA boards on Mark V gas turbine cabinets.2. 蒸汽轮机、联合循环机组年度大修备件储备,预防性维护。
Spare stocking for annual overhaul and preventive maintenance of steam and combined cycle units.3. 老透平控制系统改造,保留原有Mark V机架结构,更换故障接口板。
Legacy turbine retrofit projects keeping original Mark V rack structure.4. 信号通讯异常、通道丢失等疑难故障的备用替换板。
Backup spare for intermittent signal dropout and channel communication faults.5. 海外电站透平设备售后备件供货,配套机架接线与信号调试。
Overseas power plant spare supply with rack wiring and signal commissioning service.
FAQ 常见问答
Q: Can DS200ADGIH1AAA be used on Mark VIe system? / 是否适用于Mark VIe系统?
A: No, it is designed exclusively for Mark V platform, cannot work on Mark VIe racks.
不可以,该板专为Mark V平台开发,无法在Mark VIe机架上使用。
Q: Can generic interface boards substitute this board? / 通用接口板能否替代?
A: Not recommended, pin assignment and signal timing are Mark V proprietary, same part replacement is required.
不建议,引脚定义、信号时序为Mark V专用,优先同型号替换。
Similar Models 相似型号
DS200ADCIF1ABA
DS200TCCAG1AJB
DS200TCQCG1AJD
DS200SSHV
GE Mark V DS200 series boards
Tags: GE 驱动板 DS200ADGIH1AAA
Technical parameter
Business License
Main products
