DS200ADMAH1AAC analog digital module daughter board

Description

Argument

Products Description

DS200ADMAH1AAC analog digital module daughter board

VMIVME-1150-123L.20200713_173228 (12).jpg

主营产品.jpg

DS200ADPAG1ABB has a 40-pin connector The GE Genius adapter board DS200ADPAG1ABB has a 40-pin connector and a 26-pin connector.It also has a 3-pin connector and a 10-pin connector.The GE Genius adapter plate DS200ADPAG1ABB has holes for you to use when replacing the plate.The board is 8.5 inches long and 2.75 inches high.There are specific spots inside the drive designed specifically for the circuit board, with the screw holes lining up with the holes on the circuit board.After the drive is powered down and you have tested the drive to verify that it is safe to touch the internal components and circuit board, locate the DS200ADPAG1ABB and check a few factors before removing it.First, note where the circuit board is in the drive and where it connects to the drive.The service person will install the replacement board in the same location, and it's a good idea to note any boards or cables that might block access to the board.Be prepared to move any cables that block access to the drive or have fragile components that you want to avoid bumping.Also pay attention to the cables connected to the circuit board and how the cables are routed in the drive.It is important to route the cables in the same manner because the sensitive signals carried by the cables are easily interfered by the power lines.Additionally, airflow is important to keep components cool, and incorrect cable routing can interfere with the free flow of air.

微信图片_20220402160536.png