PPT VISION 661-0337 PPT5200 CCD Machine Vision Camera

PPT VISION 661-0337 PPT5200 belongs to the C-Series interline transfer CCD industrial camera, featuring 640×480 VGA resolution and C-mount lens interface. It captures high-speed digital images for automated visual inspection, object positioning and defect detection in production lines.

This camera supports partial scanning to raise frame rate and adjustable electronic shutter, connected via DSL cable for power, image transmission and signal control. It is widely used as spare parts for packaging, electronics and semiconductor machine vision system maintenance and renovation projects.

Main Specifications

1. Brand: PPT VISION; Model: PPT5200; Part No:661-0337; Series: C-Series; Type: CCD Industrial Vision Camera
2. Sensor: Interline Transfer CCD; Resolution:640(H) × 480(V) pixels; Pixel size:7.4μm ×7.4μm
3. Frame Rate: 60fps at full resolution, higher speed with partial scan; Shutter:31~127795μs adjustable
4. Lens Mount: C-mount; Cable: DSL cable, max 25m for power, video and control signal
5. Gain Range: 50% ~ 400%; Optical fill factor:60%
6. Operating Temperature:0℃ ~ +50℃; Compact housing for industrial cabinet or fixture mounting
7. Supply Status: Discontinued industrial vision camera spare for inspection system overhaul and emergency replacement

Core Functions

1. Capture clear digital images for machine vision inspection, positioning and part recognition tasks.
2. Adjustable electronic shutter and gain to adapt different lighting conditions on production lines.
3. Partial image scan function to boost frame rate for high-speed continuous product inspection.
4. C-mount interface supports different industrial lenses to meet varied field-of-view requirements.
5. DSL integrated cable realizes one cable transmission of power, image and control signals.
6. Stable CCD imaging performance, compatible with PPT Vision vision processor and inspection software.

Application Scenarios

1. Image capture unit for PPT VISION C-series machine vision inspection systems.
2. Fault camera replacement and routine maintenance of existing automated vision inspection platforms.
3. Electronic component inspection, packaging quality check, semiconductor and automotive part visual detection.
4. Emergency replacement for camera failure to restore product image acquisition and visual inspection function.
5. Spare parts stocking for maintenance teams supporting factory machine vision automation systems.
6. Aftermarket spare supply for inspection station upgrade and machine vision system reconstruction.

FAQ

1. Q: What is PPT VISION 661-0337 PPT5200?
   A: It is C-series interline transfer CCD industrial camera for machine vision, used for product image capture and visual quality inspection.
2. Q: What are typical module failure symptoms?
   A: No image output, blurry image, abnormal noise spots, frame drop, communication failure with vision controller.
3. Q: How to complete commissioning and diagnosis?
   A: Install C-mount lens, connect DSL cable to vision controller, configure shutter and gain parameters, test image capture via vision software.