监测器 BENTLY 129486-01

BENTLY 3500电源备件BENTLY 129486-01高压直流电源模块

3500交流和直流电源接受广泛的输入电压，并将其转换为其他3500模块可接受的电压。以下电源可与3500系列机械保护系统一起使用:

通用交流电源

高压直流电源

低压直流电源

使用3500系统机架安装所有3500监控模块和电源。该机架允许您将3500个模块放置在彼此附近，使它们能够轻松通信，并安装必要的电源以分配每个模块的电源。

BENTLY 129486-01 职务说明

    3500机架容纳TDI的通信处理功能。虽然TDI执行了一些由整个机架共享的任务,但它并不是监测系统的一个重要组成部分,也不影响整个系统如何监测自主机械保护。

 每3500个机架需要一个TDI或边缘,它总是占据一个槽.(在电源旁边)。

    3500监测系统与兼容软件之间的链接称为3500/22M瞬态数据接口(TDI)(系统1条件监测和诊断软件和3500系统配置软件)。TDI将3500/20机架接口模块(RIMM功能)与像TDXNET这样的通信处理器相结合,以收集数据。

BENTLY 129486-01 配置键锁

 它可以在"运行"和"程序"模式之间切换3500个机架。运行模式避免了配置修改,而允许机架正常运行.在正常运行的情况下,可以在本地或远程配置机架。开关可以保持在运行或程序的位置,通过移除在任何位置的机架上的键。您可以通过将开关锁定在运行位置来防止不必要的机架重构。当一个机架需要远程重新配置时,开关可以锁定在程序位置。

BENTLY 129486-01 通讯

电子邮件主机协议

3500配置软件,3500数据采集软件,3500显示软件(BN主机协议通信)

BENTLY 129486-01 TDI协议

系统1情况监测和诊断软件和国家统计局TDI协议

BENTLY 3500 Power Spare Parts BENTLY 129486-01 High Voltage DC Power Module

The 3500 AC and DC power supplies accept a wide range of input voltages and convert them to voltages that are acceptable to other 3500 modules. The following power supplies can be used with the 3500 Series Machinery Protection System:

Universal AC power supply

High voltage DC power supply

Low-voltage DC power supply

Use the 3500 System Rack to install all 3500 monitoring modules and power supplies. The rack allows you to place 3500 modules close to each other, allowing them to communicate easily, and install the necessary power supplies to distribute the power to each module.

BENTLY 129486-01 Job Description

The 3500 rack houses TDI's communication processing capabilities. While TDI performs some tasks that are shared by the entire rack, it is not an important part of the monitoring system and does not affect how the entire system monitors autonomous machinery protection.

Every 3500 racks require a TDI or edge which always occupies a slot. (next to the power supply).

The link between the 3500 monitoring system and compatible software is referred to as the 3500/22M Transient Data Interface (TDI) (System 1 Condition Monitoring and Diagnostics Software and 3500 System Configuration Software). TDI combines a 3500/20 rack interface module (RIMM function) with a communications processor like TDXNET to collect data.

BENTLY 129486-01 Configure keylocks

It can switch between "Run" and "Program" modes for 3500 racks. The operating mode avoids configuration modifications and allows the rack to function normally. The switch can be kept in the running or program position by removing the keys on the rack in any position. You can prevent unnecessary rack reconfiguration by locking the switch in the operating position. When a rack needs to be reconfigured remotely, the switch can be locked in the program position.

BENTLY 129486-01 COMMUNICATIONS

Email Host Protocol

3500 Configuration Software, 3500 Data Acquisition Software, 3500 Display Software (BN Host Protocol Communication)

BENTLY 129486-01 TDI PROTOCOL

System 1: Situation monitoring and diagnostic software and the NBS TDI protocol

应用领域

船舶

电厂

包装印刷

BENTLY 其他型号（Other models）

BENTLY 167699-02

BENTLY 3300/16-14-01-03-00-00-01

BENTLY 3500/15

BENTLY 3500/20

BENTLY NEVADA 125760-01

BENTLY NEVADA 125768-01

BENTLY NEVADA 129478-01

BENTLY NEVADA 3500